Fix it

How to Sync Connect Wii Black Console to Balance Board

Connecting and syncing the Wii Black Console to the Wii Balance Board can be at times challenging, especially if you are short on patience like me. But it is rather an easy process if the wii system and board are functioning correctly.

Here’s what to do:

1. Take off the battery cover located underneath the Wii Balance Board. Just above the batteries, you’ll see a small red button.

2. On the Black Wii console, open the panel where the SD memory card slot is located. There is a rectangular red button.

3. Press and release each sync button within 45 seconds.

4. The blue LED on the balance board should be blinking, and then it will turn solid once the Balance Board and Wii Black Console have been paired.

5. Insert your Wii Fit or Wii Fit Plus disk into the Wii Black Console and check that the Balance Board is working properly.

Note: If the Wii Balance Board blinks but doesn’t turn to a solid blue, it may need a fresh set of batteries.

Fix LG Optimus G Retrieve Interval Grayed Out Setting

There are some LG Optimus G smartphone users who have been having problems or issues with not being able to change the manual setting to receive emails and may not be receiving emails to their phone

If your Sync setting is turned off, you will not be able to change the retrieve interval setting since it’s been disabled.

In order to “fix” it, follow the troubleshooting suggestion below:

Drag down from the very top of the screen to access your quick settings menu (QuickMemo, Sounds, Wi-Fi, NFC, Sync) The Sync setting must be “turned on”. This has to be on Blue in colour (in some cases) in order to change the retrieve settings.

Once the Sync button is turned “on” – go and re-open your email settings and you should have access to the change the retrieve interval from Manual to 15-minutes, 30-minutes, 1-hour, 2-hours, 4-hours and 8-hours.

LG cellphone issue: LG Optimus G, Troubleshooting, Un-clickable, won’t let me change or access settings.

Having problems with your blower fan not shutting off after turning off the ignition? Has your car battery died due to this issue?

First thing is to pull the fuse under the hood for the blower. This will save your battery.

Next thing is to determine the problem. Check to make sure that the wires to the Blower Motor Resistor Control Module have power going through them.

In many cases for GM & Chevy vehicles (Suburban 1500, 2500, Sierra, Yukon, Silverado, Trailblazer, GMC Envoy, Buick Ranier, Oldsmobile Bravada) the problem lies within the Blower Motor Resistor Control Module. This part needs to be replaced.

Manufacturer Part Number: JA1639, 52409643, 52413530, 52495874

Same as OEM Interchange Part Number: 89018778, 89018964, 89019351, 93803636, RU-631

Other Part Numbers: 15-80567, 15-80906, 4P1516, RU1321, 53-69738, BR532